Why to Install Evaporative Coolers

   If you are constantly worried with the rising electricity bills. you have a good reason to replace your air conditioner with aportable air cooler. The evaporative air cooler uses electricity 75% less than the traditional air conditioner. Moreover, the very cost of evaporative coolers is almost half the price of other modern cooling mediums. Another reason for installing evaporative coolers is the ease of installing it. They require an electricity of just 120-volt to operate and can be easily plugged into any outlet.

Evaporative air  cooler

   If you are still wondering as why to install evaporative coolers, there are a few characteristic features that can answer your question. Moisture is added to the air by the swamp coolers that prevents wooden fabric and furniture from becoming dry. Moreover, the wet pads in the coolers prevent pollutants and pollens from entering the room. keeping it pollution and germ free. The small air coolers require very little duct system as they can be easily placed in windows and other places.

How to Use an Evaporative Cooler

    At a time when efficient use of energy has become a worldwide concern, evaporative coolers are an

attractive means of staying cool when it's not so cool outside. When compared to standard air conditioning, these units require less energy and are also less expensive. Their only drawback is how they are described. They are evaporative coolers.

Instructions

• 1
  Investigate the energy efficiency of an evaporation cooler. Compared to a typical refrigeration form of air conditioning, an evaporation unit uses 1/10 to 1/3 the amount of energy. Evaporative coolers are definitely more efficient.
• 2
  Evaluate your cooling needs. Decide whether or not you need something as simple as a single room evaporative unit. This is basically the equivalent of a single room air conditioning unit except it is based on evaporative technology and has the same energy coefficient advantages. If a single room unit will suffice, consider options and purchase one.
• 3
  Decide if you home is configured for the use of a larger evaporative unit if a single room unit will not suffice. Basically, this has to do with whether ducting can be easily set up that will establish cool air flow and ventilation.
• 4
  Explore in greater detail the design and construction of evaporative coolers. Consider whether or not you want a one or two phase unit--two phase units are less energy efficient and more expensive but do not introduce humidity into your home.
• 5
  Consider the extra consumption of water that is necessary for the use of a unit. This factor is often forgotten relative to both cost and use of resources.
• 6
  Decide whether to use a ducted unit or a central unit. Compute the number of square feet to be cooled. Decide on the size unit that will be needed. Decide whether you will install the unit or have it done.
• 7
  Learn about maintenance of an evaporation unit--how it's cleaned, how it's winterized, and how its electrical systems are maintained.

Evaporative air cooler AZL06-ZY13E

Understanding evaporative air cooler

If you are from a coastal area you may not be familiar with evaporative coolers. The following are some guides for understanding them, and some tips for getting the most out of them.

·         Coolers don’t work well during humid times of the year.  Because coolers work by adding moisture to the air, above 50% humidity they just don’t work well. On those days you will have to run the A/C - if you have it. Also, don’t run the A/C and cooler at the same time. A/C’s remove moisture from the air, so the two will just be fighting against one another.

·         Open up some windows. Coolers work by air displacement - you must have enough windows open in order for the hot air to escape. A good way to tell if you have enough windows open is to turn the cooler on high and open your front door. Slowly close it until it is about 6 inches away from the door jam, and let it go. It should close gently on its own. If it slams shut you have too few windows open; if it doesn’t close at all you have too many open. Adjust them until you get the desired effect. Many people don’t like the idea of leaving windows open when they leave the house. In this case an attic vent will have to be installed - the windows can be left closed.

·         Regular service is a MUST - once a year at least. You may require servicing more often if the water in your area is very hard. A bleed off or cooler drainage system will reduce the mineral buildup in your cooler. They are not very expensive, and the water drained off by these devices doesn’t have to be wasted. Additional tubing can be installed so that this water can be used to water your plants and shrubbery.

·         White dust and a fishy smell are common complaints with coolers. These are the results of the minerals that are present in the water or organic matter sucked in during operation. These problems can be reduced with water additives and the bleed off devices mentioned earlier. Several old fashioned remedies, such as cider vinegar and fabric softener, can help with scale buildup and pad absorbency. And you would be surprised how far a cup or two of mouthwash will go in helping to freshen up a smelly cooler!

·         Don’t run “softened” water to the cooler. The chemicals used to soften water can aggravate scale buildup and even damage the cooler, which voids most warranties.

·         It is a good idea to turn the pump on for 5 minutes before starting the cooler fan. This will presoak the pads, and help reduce hot air coming out of the registers. There are cooler control kits available that will automatically wet the pads and cycle the unit on and off.    

          Evaporative coolers are common and perform well when the humidity is low. They are inexpensive to operate, which contributes to their popularity. Being aware of their peculiarities will save you undue stress and reduce the number of breakdowns. This short list should help toward that end. If you experience any problems, don’t hesitate to call.



Evaporative air cooler

 

      

About Aolan

    As a leader in the field of international evaporative air cooler industry, so far, Aolan has developed 11 series with more than 80 kinds of air cooler,with airflow from 800m3/h to 80000m3/h. And they have been used in different fields, including domestic,commercial, industrial areas.
   Aolan holds the beliefs of being scientific, strict and extending and led by board directors, Aolan products have been exported to more than 50 countries and regions, including countries from Europe, America, Korea, Japan, South America and Africa, etc. What's more, Aolan drafted and made the National Standards of Evaporative Air Cooler. By building the only national lab for evaporative air cooler, Aolan is becoming an important training place for advanced talents for the field.
   With goal of annual production of 200000 units, Aolan is developing into a integrated company which collects R&D, manufacturing, industrial and trade on evaporative air coolers.
   Welcome dealers&traders home and abroad to us for cooperation in various ways.
   
                                        



Aolan factory

Aolan workshop

Aolan Nation lab

Aolan metal workshop